Power Connect Newsletter Archive

Article Archive

Find articles from previous editions of the Power Connect Newsletter.

Installation Acceptance Testing (NFPA 110 requirements)

02/06/2015

Installation Acceptance Testing (NFPA 110 requirements)
Installation Acceptance Testing (NPFA 110 requirements)
Read the Full Article

Understanding the Requirements of Critical Operations Power Systems (COPS) - Part 1

31/10/2014

Understanding the Requirements of Critical Operations Power Systems (COPS) - Part 1
As a result of 9-11, Hurricane Katrina and other disasters, the Department of Homeland Security determined new requirements were needed to protect electrical systems at vital infrastructure facilities that could impact national security, the economy, and public health and safety. Article 708, Critical Operations Power Systems (COPS), was added to the NEC based on the need for standards that could strengthen homeland security.
Read the Full Article

Power Design Pro: Load Characteristics

31/10/2014

Power Design Pro: Load Characteristics
This is the fourth article in our series about Power Design Pro™ Software and it highlights the options users can make to load characteristics.
Read the Full Article

Generac-Sponsored Webinar: Selective Coordination for Critical Power

31/10/2014

Generac-Sponsored Webinar: Selective Coordination for Critical Power
Sign-Up for Webinar on Critical Power: Selective Coordination Generac sponsors and invites you to register for Consulting-Specifying Engineering magazine’s free November 13 webinar, Critical Power: Selective Coordination.
Read the Full Article

Generac Relaunches 800 kW to 2 MW Generators

31/10/2014

Generac Relaunches 800 kW to 2 MW Generators
Generac is relaunching its new single-engine generators from 800 kW to 2 MW, and multi-megawatt integrated onboard paralleling systems.
Read the Full Article

Follow Us on LinkedIn and Facebook

31/10/2014

Follow Us on LinkedIn and Facebook
Follow Us on LinkedIn and Facebook Generac Power has launched LinkedIn and Facebook pages highlighting industrial standby power and event announcements.
Read the Full Article

Top 10 AHJ Points of Confusion - Part 1 of 2

10/09/2014

Top 10 AHJ Points of Confusion - Part 1 of 2
Generac has created a Top 10 list so that during an inspection, you can be prepared to address these issues.
Read the Full Article

Why Generac’s Earning Report Matters to You

10/09/2014

Why Generac’s Earning Report Matters to You
Generac’s positive earnings in the Commercial and Industrial markets are a win for you as well as Generac.
Read the Full Article

Power Design Pro™ Tip: Project Setup and Reporting

10/09/2014

Power Design Pro™ Tip: Project Setup and Reporting
This is the third article in our new series that provides tips, tricks and shortcuts for mastering Generac’s Power Design Pro™ Software.
Read the Full Article

Generac Meets Two Sweetspots in the Oil and Gas Sector: Upstream and Downstream

10/09/2014

Generac Meets Two Sweetspots in the Oil and Gas Sector: Upstream and Downstream
Magnum Power Products and Generac combine to each serve diverse sectors in this complex industry.
Read the Full Article

Top 10 Backup Power Considerations - Wastewater Treatment Facility

22/07/2014

Top 10 Backup Power Considerations - Wastewater Treatment Facility
When designing a wastewater treatment facility, these are the top 10 key design considerations for selecting a properly configured generator.
Read the Full Article

Symbiont Partners with Generac and Wolter

22/07/2014

Symbiont Partners with Generac and Wolter
Businesses that operate wastewater treatment systems deal with a lot of variability in the wastes coming into the system. At the same time, the effluent discharged into streams, lakes and other bodies of water must be incredibly consistent and meet appropriate limits to protect fragile eco-systems.
Read the Full Article

Power Design Pro™ Tip: Basic Data Input Screens

22/07/2014

Power Design Pro™ Tip: Basic Data Input Screens
This is the second article in our series about Power Design Pro™ Software and it covers the basic screens you will see when sizing a project.
Read the Full Article

New, Improved SG130 and SG150 Gaseous-Fueled Generators

22/07/2014

New, Improved SG130 and SG150 Gaseous-Fueled Generators
Generac introduces the SG130 and SG150 gaseous-fueled generator sets featuring our innovative 9.0L V8 turbocharged, after-cooled industrial engine. They provide optimized power output, engine/alternator operation at 1800 rpm, and reduced sound emissions
Read the Full Article

How Generac’s Employee Culture Benefits Partners and Customers

22/07/2014

How Generac’s Employee Culture Benefits Partners and Customers
For the second time in three years, Generac has been recognized as one of the Top 25 Best Large Companies to work for in Southeastern Wisconsin.
Read the Full Article

Government Funding for Businesses That Install Emergency Backup Power Systems

22/07/2014

Government Funding for Businesses That Install Emergency Backup Power Systems
Many local communities have been devastated by hurricanes, tornados, severe snowfalls and other violent wind storms. As a result, state governments are beginning to provide funding for service stations and other businesses that install emergency backup power systems to serve constituents during crisis.
Read the Full Article

Power Design Pro™ Tips - Harmonic Analysis Overview

23/06/2014

Power Design Pro™ Tips - Harmonic Analysis Overview
This harmonic analysis overview is the first article in our new series that provides tips, tricks and shortcuts for mastering Generac’s Power Design Pro™ Software.
Read the Full Article

Move Projects Forward with GE’s New Financing Program

23/06/2014

Move Projects Forward with GE’s New Financing Program
Move Projects Forward with GE’s New Financing Program GE Capital Equipment Finance teams with Generac to provide loan and lease financing options for commercial and industrial end-users.
Read the Full Article

Key Trade Editors Visit Generac to Gain Insight

23/06/2014

Key Trade Editors Visit Generac to Gain Insight
Generac hosted key trade magazine editors at its Oshkosh, WI facility so they could learn more about Generac’s industrial and commercial solutions.
Read the Full Article

Generac’s First Annual Latin America Dealer Conference

23/06/2014

Generac’s First Annual Latin America Dealer Conference
To enhance relationships with the dealers based in Latin America, Generac held its first “local” dealer conference in Mexico.
Read the Full Article

Conviértase en un usuario experto de Power Design Pro™

28/05/2014

Conviértase en un usuario experto de Power Design Pro™
Esta nueva serie le ofrecerá consejos, trucos y atajos para dominar el software Power Design Pro™ de Generac.
Read the Full Article

Compromiso de comunicación con los ingenieros de Generac mostrado durante el 6to simposio de ingeniería anual

28/05/2014

Compromiso de comunicación con los ingenieros de Generac mostrado durante el 6to simposio de ingeniería anual
El 6.º Simposio anual de ingenieros, que se llevó a cabo del 4 al 7 de mayo de 2014, en Milwaukee, Wisconsin, facilitó la posibilidad de aprender y compartir de ingeniero a ingeniero y brindó a los ingenieros la posibilidad de obtener un CEU completo (10 PDH).
Read the Full Article

Compartir el conocimiento ayuda al negocio, las agencias del gobierno protegen a los activos y salvan vidas potencialmente

28/05/2014

Compartir el conocimiento ayuda al negocio, las agencias del gobierno protegen a los activos y salvan vidas potencialmente
El equipo de administración de Generac comparte conocimiento para ayudar a la empresa y a las agencias gubernamentales a mantener continuidad y prevenir tragedias.
Read the Full Article

El valor de ofrecer flexibilidad de diseño

28/05/2014

El valor de ofrecer flexibilidad de diseño
Ahora que Generac brinda generadores diésel de un solo motor de hasta 2 MW, es más importante que nunca recordar a los clientes la variedad de formas en la que pueden alcanzar la capacidad de energía de respaldo que necesitan. Tal vez necesitan un generador de un solo motor, y de ser así, Generac seguro puede brindarlo.
Read the Full Article

Conferencia de primavera 7x24 Exchange

29/04/2014

Conferencia de primavera 7x24 Exchange
Generac Industrial Power participará de la conferencia de primavera 7x24 Exchange 2014, que se llevará a cabo del 1 al 4 de junio en Boca Raton Resort & Club, en Boca Raton, Fla.
Read the Full Article

Download Archive

December 2012
Redesign of 400-600kW Diesel Products | University of Utah Install is MPS Showpiece | New Spark Ignited Engines Mean Longer Life | IBC 2009 and 2012 Seismic Certification

December 2011
Code Changes Difficult to Interpret | Power-Gen International | EGSA Testing Requirements | Emergency Systems Webcast

April 2011
CCI Improvements | Power Design Pro Enhancements | Product of the Year Award | Case Study - Peak 10 | 2011 Engineering Symposium

November 2010
Gaseous Fuel Genset | Power Design Pro Enhancements | Generac Wins CSE Award | POWER-GEN in Orlando | Case Study - College of William & Mary | Ultra Low Sulfur Diesel FAQ’s

July 2010
Generator Reliability | Case Study: Gordon Food Service | Selecting Breakers for Fire Pumps | Engineering Power Symposium | Dan Barbersek at EGSA Conferenece

April 2010
Application Engineering Group | Generac Engineering Symposium | Republic Bank and Plaza Case Study | GENprotect Defends in Two Ways | Experience the Power Demo Trailer

December 2009
Introducing Generac Industrial Power | Power Design Pro | E2E: New EPA Requirements

August 2009
Generac Complies with New EPA Regulations | The Generac 2009 Engineering Symposium | Coosa Valley Medical Center Case Study

June 2009
Generator Sizing Pitfalls | Engineer to Engineer (E2E) | Case Study

Generac Stock Ticker

  • NYQ
  • GNRC
  • $35.75
  • 9/28/2016 4:02 PM EST